ADDITIONAL TREATMENTS AND COATINGS FOR FINNED PACK HEAT EXCHANGE
CATAPHORESIS BLYGOLD THERMOGUARD HERESITE TINNING TREATMENT
- Language
Month: November 2017
W – WIRING WITH SPECIAL ELECTRICAL PANEL
Voltage and frequency upon request Main switch General protection with fuses for fans and speed controller Contactors for each fans or groups of fans Switches for each fan upon request Box in plastic or metallic material Protection class IP6X (upon request) Door lock with key Suitable for corrosive environments, etc Variable number of fans following the installation field Cables suitable for outdoor use, UV resistant In compliance with "CE" regulations
CONTAINERIZABLE VERSION
Rails for loading into container are available for V-Type containerizable models. ThermoKey is able to supply units with dimensions suitable for container loading, with rails for the handling and protection during transport.
INSPECTIONABLE FANS
To improve the inspection and to facilitate the heat-exchanger cleaning on fans side.
EXPANSION TANK
It is possible to provide the expansion tank (for ThermoKey drycoolers) properly sized for the circuit.
SPRAY J CLEANING SYSTEM
Cleaning system with pipes placed on the front of the unit and internal nozzles, which sprays water from inside to outside, in order to clean the heat exchanger. Through the electronics integrated in our electrical panels, it is also possible to provide and schedule the timing of the cleaning system and reversing the rotation of the fans.
EPS EVAPORATIVE PANEL SYSTEM
The evaporative panel system completes ThermoKey’s offer for adiabatic cooling. Thanks to a homogeneous and adjustable distribution of water on the panels this system allows to reach a high saturation level and therefore an efficient capacity increase with low water consumption (hours per year unlimited). EPS has been designed for seasonal working cycles without any specific time limitation and can be completely disassembled for cleaning and maintenance operations. Thanks to the evaporation...
WFS WET FIN SYSTEM
It is ThermoKey hybrid cooling system which allows a complete flexibility of operation, working at low pressure (2-3 bars) and for a very high number of hours per year (up to 1000). The user can choose whether to prioritize the consumption of water or electricity. Thanks to the misting effect and to the increased exchange efficiency, the WFS system allows to reach higher saturation levels. Since WFS systems use water for a high number of hours per year, a black double-layer fin is provided in...
AFS AIR FRESH SYSTEM
ThermoKey adiabatic cooling system equipped with special high-pressure nozzles, which allows to compensate for the peaks of power to be dissipated, with minimum water consumption for a maximum of 500 hours per year. The combination of high pressure water, the nebulization effect of nozzles (MISTING effect) and a specially designed electronic control system represent the innovative principle of AFS system. It uses only the quantity of water necessary to obtain the desired adiabatic effect....
FLANGES
It is possible to select slip-on aluminium or stainless steel flanges. The unit is supplied with a nitrogen pre-charge of about displayed on the pre-installed manometer.
SHOCK ABSORBERS
Vibrations are generated by the rotation of the fan motors or due to the plant, from industrial or natural phenomena. The vibrations are harmful waves and may cause problems. They can also be very dangerous in the case of resonance phenomena. The schock absorber can considerably reduce the vibratory disturbance, as well as the noise, since it is installed between the source of vibration and the mechanical anchoring. It is possible to select this standardized accessory or require special...
EP – EC PLUS SPEED CONTROLLER
The EC PLUS Ep is a multifunction and multiple-input unit for the regulation of speed of threephase electronically commutated motors installed on axial fans, which is designed to regulate different EC motors, in a simultaneous and coordinated way, using programmable input signals. Power supply: IP55: 2ph+PE 400Vac ±20% (other voltages upon request). TECHNICAL DATA Power supply: 2ph+PE 400Vac ±20% (other voltages upon request). Operating temperatures: -20°C ÷ 50°C Junction box...
EB – EC BASIC SPEED CONTROLLER
The EC BASIC Eb is a multifunction and multiple-input unit for the regulation of speed of three phase electronically commutated motors installed on axial fans, which is designed to regulate different EC motors, in a simultaneous and coordinated way, using programmable input signals. TECHNICAL DATA Power supply: 2ph+PE 400Vac ±10% (other voltages upon request) Working temperatures: -20°C ÷ 50°C Junction box in thermoplastic UV protected material with protection class IP55...
Q4E – ELECTRICAL PANEL
Q4E – ELECTRICAL PANEL FOR EC FANS WITH PAINT COATED METAL CASING, INTERNALLY MOUNTED CONTROLLER, PROTECTED BY AUTOMATIC SWITCHES (CIRCUIT BREAKERS) CONNECTED TO GROUPS OF FANS, FAN REGULATION CONTROL MODBUS RS485. PANEL-MOUNTED SWITCHES (1 SWITCH EVERY 2 FANS) (1X2). Metal casing painted RAL7035, 120 micron thickness, suitable for outdoor installation Protection class IP65 Working temperatures: -20°C/40°C Power supply: 3~ 400V / 50Hz +PE Main switch Box-mounted switches (1 switch...
Q3E – ELECTRICAL PANEL
Q3E – ELECTRICAL PANEL FOR EC FANS WITH PAINT COATED METAL CASING,CONTROLLER MOUNTED INSIDE THE BOX, PROTECTED BY AUTOMATIC SWITCHES (CIRCUIT BREAKERS) CONNECTED TO GROUPS OF FANS, FAN REGULATION CONTROL MODBUS RS485, INTERNAL ANTI CONDENSATE HEATING ELEMENT Metal casing painted with RAL7035, 120 micron thickness, suitable for outdoors installation. Protection class IP65. Working temperatures: -40°C/40°C. Power supply: 3~ 400V / 50Hz +PE. Master switch. Protected by automatic...
Q2E – ELECTRICAL PANEL
Q2E – ELECTRICAL PANEL FOR EC FANS WITH PAINT COATED METAL CASING, CONTROLLER MOUNTED INSIDE THE BOX, PROTECTED BY AUTOMATIC SWITCHES (CIRCUIT BREAKERS) CONNECTED TO GROUPS OF FANS, FAN REGULATION CONTROL MODBUS RS485 Metal casing painted RAL7035, 120 micron thickness, suitable for outdoor installation Protection class IP65 Working temperatures: -20°C/40°C Power supply: 3~ 400V / 50Hz +PE Main switch Protected by automatic switches (circuit breakers) connected to groups of fans...
Q1E – ELECTRICAL PANEL
Q1E – ELECTRICAL PANEL FOR EC FANS WITH PAINT COATED METAL CASING. PROTECTED BY AUTOMATIC SWITCHES (CIRCUIT BREAKERS) CONNECTED TO GROUPS OF FANS, EXTERNAL CONTROL 0-10V. Metal casing painted RAL7035, 120 micron thickness, suitable for outdoor installation Protection class IP65 Working temperatures: -20°C/40°C Power supply: 3~ 400V / 50Hz +PE Main switch Protected by automatic switches (circuit breakers) connected to groups of fans Suitable to connect EB + EP + UN + FC300...
W3E – ELECTRICAL PANEL
W3E – ELECTRICAL PANEL FOR EC FANS WITH PLASTIC CASING, FUSE PROTECTION FOR GROUPS OF FANS AND EXTERNAL CONTROL 0-10V Plastic UV-resistant box Protection class IP55 Working temperatures: -20°C/40°C Power supply: 3~ 400V / 50Hz +PE Main switch Fuse protection for groups of fans Suitable to connect J + EN + EB + EP + EM controllers (to be mounted outside this panel) Fan speed regulation control with 0-10V signal Free contact on main switch for ON/OFF indicator Free fan alarm contact...
W2E – ELECTRIC BOX FOR EC FANS WITH PLASTIC CASING AND FAN SWITCHES (1X2)
Plastic UV-resistant box Protection class IP65 Box-mounted switches (1 switch every 2 fans) Contacts for switch status indication Working temperatures: -20°C/40°C Power supply: 3~ 400V / 50Hz +PE Fan speed regulation control with 0-10V signal Free fan alarm contact Fan side MODBUS RTU RS485 communication (only on request) Quick power connectors for fans directly on panel Quick signal connector for fans directly on panel Execution in compliance with CE regulations
W1E – ELECTRIC BOX FOR EC FANS WITH PLASTIC CASING
Plastic UV-resistant box Protection class IP55 Working temperatures: -25°C/40°C Power supply: 3~ 400V / 50Hz +PE Fan speed regulation control with 0-10V signal Free fan alarm contact Fan side MODBUS RTU RS485 communication (only on request) Quick power connectors for fans directly on panel Quick signal connector for fans directly on panel Execution in compliance with CE regulations
P – SPECIAL CUT PHASE FAN SPEED CONTROLLER (ON DEMAND)
Controller P is a multifunction and multiple-input unit for the regulation of speed of asynchronous three-phase motors installed on axial fans. This device works as a voltage controller according to the cut phase principle (control over the three phases) in order to continuously increase and reduce the value of voltage supplied to three-phase AC motors mounted on the fan units. TECHNICAL DATA Three-phases power supply: 3ph+PE 280-415V (-10%/+6%), 50/60Hz Available controller...
Z – INVERTER SPEED CONTROLLER WITH SINUSOIDAL FILTERS INSTALLED
Inverter Z guarantees a remarkable energy saving and reduces the noise produced by the fans during the regulation phase. This is why it is ideal in environments with very limitating noise level restrictions.It is designed for the regulation of three-phase asynchronous motors mounted on heat exchangers. Suitable when low sound levels are required. TECHNICAL DATA Three-phases power supply: 3ph+PE 208-480V (-15/+10%), 50–60Hz Sinusoidal integrated filter between phase and phase and...
G – STEP FAN SPEED CONTROLLER (on demand)
Controller G is an electronic three-phase control unit designed according to the voltage step technology for accurate regulation, totally free of sound, electrical and electromagnetic disturbance. Thanks to this type of controller, effective voltage fed to the motor fitted in the fan varies according to fixed values that are determined by the steps featured in the auto-transformer and in the asynchronous motor. In this way, regulation is perfectly sinusoidal (constant frequency) and can be...
SINGLE-PHASE R – PHASE CUT SPEED CONTROLLER
Esy 1 is a tension speed controller used with asynchronous single-phase motors mounted on heat exchangers. TECHNICAL DATA Single-phase power supply:1ph+N+PE 230V ± 20 % - 50/60Hz. Working temperatures: -10°C ÷ 50°C. Box in thermoplastic UV protected material with protection class IP56. Input by external signal or transducer: 4-20mA; 0-5V; 0-10V; NTC 10KOhm 25°C; Regulation mode MASTER “P” (temperature or pressure probes) or SLAVE (0-10V) Possibility of connection for...
R – PHASE CUT SPEED CONTROLLER
It is a regulator that works as a voltage controller according to the cut phase principle (control over the three phases) in order to continuously increase and reduce the value of voltage supplied to three-phase AC motors mounted on heat exchangers. TECHNICAL DATA Three-phases power supply: 3ph+PE 400Vac ± 20 % - 50/60Hz (other voltages upon request) Available controller sizes: 12A, 20A, 26A, 40A, 60A Operating temperatures -20°C ÷ 50°C Junction box in thermoplastic UV...
I – REPAIR SWITCH
220-480V 20A – 3 poles (6 poles on request) Switch mounted and wired near the fan Working temperatures -25°C ÷ 40°C and -40°C ÷ 40°C on request or associated at low temperature electrical panels (Q3E-Q6E-Q3Y series) Locked in the open position with a padlock (optional) Black handle (red handle on request) Protection class IP65 Execution in compliance with CE regulations.
Q – WIRING WITH ELECTRICAL AC PANEL
Box in plastic UV resistant material with protection class IP55 Working temperature -25°C ÷ 40°C In compliance with EC regulations TECHNICAL DATA Power supply: 3~ 400V / 50Hz + PE. (optional 60 Hz) Current sizes: 16A, 40A, 63A Main switch Green warning light to signal system is powered. Fuse protector for main power line Thermocontacts connection for 8 fans Power connection for 8 fans N°1 input for ON/OFF control of the fans N°1 contact for general alarm Terminal block for...
E – WIRING IN JUNCTION BOX
In compliance with EC regulations Junction box in plastic UV resistant material with protection class IP54 Working temperature -25°C ÷ 40°C Power terminals and thermocontacts separately connected to junction box for each fan Power supplies to be made by customer for each fan Electrical cables suitable for outdoor installation, resistant to UV
Microchannel condensing core
TKMicro is the best solution for HVAC/R. WHY? Thanks to a thorough know-how of air-cooled units ThermoKey is able to develop new products and customized solutions in synergy with its customers. ThermoKey has invested in a state-of-the-art production process both for small batches and large series production. PRODUCTION ThermoKey is a leading company in the production of Microchannel cores in Europe. Cores are used by the main European chiller manufacturers/OEM as...
Round Tube Coils
Thermokey offers a complete range of finned heat exchangers for air conditioning, custom designing the sizes of both the finned surface as well as the circulation, to satisfy the client’s every need. Refrigeration: used to cool civil and industrial environments, such as theatres, hospitals, offices, hotels, airports and cold rooms. Cooling/ Heating: make the most of the heat exchange between fluid and air and are used to regulate the temperature of process fluids. Used, for example, in the...
Hen Unit Coolers
Hen Unit Coolers are engineered for the optimal preservation of potatoes and other vegetables stored in bulk. Their airflow design helps prevent moisture accumulation and ensures a consistent microclimate in the storage area, reducing the risk of spoilage and product degradation. Area of use: Potato and vegetables storage Performance range: Capacity from 40 to 143 kW (R404A, Te = -5 °C, T1= 0 °C, RH = 90%) Fans: Diameter Ø 800 high prevalence with differents ESP value Benefits: ...
Radial Unit Coolers
Radial Unit Coolers are designed for cold rooms where personnel is frequently present and high external static pressure (ESP) is required. Capable of delivering up to 150 Pa, these units are ideal for systems with textile ducts or advanced defrost applications, maintaining quiet operation and energy efficiency. Area of use: Air ducting Performance range: Direct Expansion operation: capacity from 10 to 115 kW (R404A, Te= 2° C, T1= 12° C, RH = 75%) Brine Operation: capacity from 7 to...
Fruit Coolers
Fruit Coolers are tailored for use in medium to large cold rooms dedicated to fruit and vegetable storage. Their airflow and coil configuration help maintain consistent temperatures and humidity levels, extending product freshness and minimizing waste. Area of use: Cold rooms specific for the preservation of fruit and vegetables Performance range: Capacity from 21 to 50 kW (R404A, Te = -8 °C, T1= 0 °C, RH = 85%) Fans: Diameter Ø 400 and 450 mm Benefits: Modular design, 3-6 fans ...
Blast Freezer Unit Coolers
Blast Freezer Unit Coolers are designed for applications requiring fast temperature reduction, such as in the meat, fish, or ready-meal industries. These models ensure rapid freezing cycles, helping to preserve food texture, nutritional value, and safety. Area of use: Cold rooms specific for either product cooling or fast freezing Performance range: Capacity from 14 to 107 kW (Te = -40 °C, T1 = -35 °C, RH = 90%) Fans: Diameter Ø 630 mm Benefits: External static 100 Pa pressure...
Industrial Dual Flow Unit Coolers
Industrial Dual Flow Unit Coolers combine robust cooling capacity with optimized airflow distribution, making them ideal for large cold rooms, processing facilities, and refrigerated warehouses. The dual flow configuration ensures low air speed and enhanced working comfort. Area of use: Medium and large cold rooms and large refrigerated warehouses to preserve fresh or frozen products Medium and large processing rooms Performance range: Direct Expansion operation: capacity up to 115...
Industrial Unit Coolers
ThermoKey’s Industrial Unit Coolers are engineered for high-volume cold storage applications, including frozen and fresh goods preservation, as well as aging rooms. These units are known for their reliability, customizable configurations, and high thermal efficiency. Area of use: Medium and large storage cold rooms or refrigerated warehouses, for the preservation of fresh and frozen products, for aging process, for long time preservation in medium and large processing rooms....
Commercial Dual Flow Unit Coolers
Commercial Dual Flow Unit Coolers are ideal for compact cold rooms used in food processing or small-scale storage. Their design ensures effective cooling at low air speed, creating a comfortable environment for operators while maintaining product integrity. Area of use: Small and medium cold rooms to preserve fresh or frozen products Small and medium processing rooms Performance range: Capacity from 1,5 to 20 kW (R404A, Te = -8 °C, T1= 0 °C, RH = 85%) Fans: Mono-phase, Ø 350 mm...
Light Cubic Unit Coolers
Light Cubic Unit Coolers offer a space-saving solution for preserving food in small and medium-sized cold rooms. Despite their compact footprint, they ensure reliable and uniform cooling performance, with low noise emissions and flexible installation options. Area of use: Small and medium cold rooms to preserve fresh or frozen products Performance range: Direct Expansion operation: capacity from 1,44 to 47 kW (R404A, Te= -8° C, T1= 0° C, RH= 85%) Brine Operation: capacity from 1 to...
TKMicro V-Type Modular Remote Condenser
The TKMicro V-Type Modular Remote Condensers are engineered for flexibility and scalability. Thanks to their modular design based on microchannel technology, cooling capacity can be distributed across multiple units, making rooftop installation simple and efficient. This solution is ideal for urban environments where space and access are limited, while maintaining excellent efficiency and low refrigerant charge. Performance range: capacity for each module: TKMicro 25: 148 kW TKMicro...
TKSmart Light Remote Condensers
Sustainable and cost-effective remote condensers with low refrigerant charge TKSmart Light Remote Condensers represent one of the most sustainable solutions available on the market. With up to 60% less refrigerant charge, low maintenance needs, and an optimized €/kW ratio, they are ideal for customers looking for environmentally responsible and economically viable systems. These units offer excellent performance with reduced operational impact. Performance range: capacity from 13 kW...
Microchannel V-Type Remote Condenser
High-efficiency and eco-friendly V-Type Remote Condensers ThermoKey V-Type Microchannel Remote Condensers are engineered with 100% recyclable aluminum, offering an environmentally friendly and economical solution. Their design, based on TKMicro microchannel technology, ensures up to 75% less refrigerant charge compared to traditional units, reducing environmental impact and operational costs. Ideal for industrial and commercial HVAC and refrigeration systems, microchannel remote condensers...
Microchannel Table-Type Remote Condenser
Compact and cost-effective condensers for small-scale applications Performance range: Capacity from 10 kW to 480 kW(*) +30% capacity vs traditional condensers with the same footprint Modular design, 1-8 fans Reduced dimensions and weight Fans: diameter Ø 300, 400, 450, 500, 630, 800, 900 mm, AC or EC motor Units can be customized with a wide range of accessories (*) Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C
Turbo-J Condensers
Compact power for high-demand cooling applications Turbo-J Remote Condensers are designed to deliver maximum thermal performance in a minimal footprint. Ideal for demanding installations that require continuous efficiency, long-term reliability, and flexibility, these units are suitable for HVAC and refrigeration systems where both space and performance matter. A robust construction and advanced fan technologies ensure long-lasting operation. Area of use: Gas condensation Performance...
Turbo-Line Condenser
Low-noise, high-efficiency condensers for limited spaces ThermoKey Turbo-Line Remote Condensers feature a high-efficiency coil geometry, making them the perfect solution where footprint is limited but performance and low noise are essential. Designed for flexibility, they are fully customizable in materials, coatings, and accessories — ensuring perfect integration into a wide range of cooling systems. Area of use: Gas condensation Performance range: Capacity from 10 to 1200 kW...
TKMicro Modular Liquid Cooler
TKMicro Modular Liquid Coolers are lightweight, compact, and highly sustainable cooling units designed with a 100% recyclable aluminum structure and low refrigerant charge. Their modular configuration and low noise emissions make them ideal for rooftop installations, even in urban environments where space and sound levels are critical. Performance range: capacity for each module up to 120 kW** Fans: Diamter Ø 800 AC and EC motor Modules: from 1 to n (**) Standard conditions -...
Super Power-J Dry Cooler
Super Power-J Dry Coolers are designed for high-capacity applications that demand top-level performance. With the ability to mount up to 20 fans and integrate adiabatic cooling systems, these units deliver maximum heat rejection and energy efficiency in even the most demanding industrial environments. Performance range: Capacity from 290 to 2219 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: Maximum performance,...
Power-J Dry Cooler
Power-J Dry Coolers are designed for installations with limited space, thanks to their compact V-shaped configuration that minimizes footprint without compromising performance. Equipped with fan speed control and optionally integrated adiabatic cooling systems, these units deliver high efficiency and adaptability across a wide range of industrial and commercial applications. POWER-J DRY COOLERS (1 FAN ROW) Performance range: Capacity from 70 to 961 kW (ethylene glycol 35%,...
Power-Line Dry Cooler
Power-Line Dry Coolers are compact, high-performance units designed to suit a wide variety of applications. Thanks to their flexible and fully customizable design — from materials and coatings to coil geometry and fan configuration — they offer an efficient and scalable solution for industrial and commercial cooling systems. POWER-LINE DRY COOLERS Performance range: Capacity from 8 to 890 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 500, 630,...
International Thermonuclear Experimental Reactor
8 V-type Dry Coolers model SJGL2790CD/4AFS ThermoKey for the next scientific revolution in energy production ITER (International Thermonuclear Experimental Reactor) is a nuclear fusion experimental reactor whose main purpose is to achieve a stable fusion reaction by validating and, if possible, increasing existing knowledge on plasma physics (high temperature deuteriotriotry). During the construction and operation of ITER advanced technological solutions will be integrated and tested...
![Thermokey - Pack. company - Australia - Microchannel condensers model JMKL2280BD(EC)W[EP.I] equipped with EC fans](https://www.thermokey.com/wp-content/uploads/bfi_thumb/Australia_pack.-company-389u5h5qvdojgald0pi9x11wvwuyq3gogtuq9ur4ml4q854m2.jpg)
Packing company – Australia
PACKING COMPANY, AUSTRALIA Microchannel condensers model JMKL2280BD(EC)W[EP.I] equipped with EC fans Over 1000 fresh produce stored bins for Australia’s leading potato and onion packing company. The client designed and installed a high efficiency medium temperature R134a system comprising a multi-compressor rack, ThermoKey microchannel condenser with EC fans and dual circuit evaporators with electronic expansion. The containerised plantroom was prefabricated, wired, tested and...
Warehouse – Reggio Emilia
6 horizontal air flow turbo line condensers and 4 industrial unit coolers ThermoKey for an innovative warehouse at -20°C with new R449A Aim: Cooling of low-temperature (-20°C) compactable storage warehouse in Reggio Emilia. Solution: One of the first installations ever, operating in direct expansion with the new refrigerant with low GWP OPTEON XP40 ® R449A R449A (replacing R404A and R507) controlled by a computerized system and managed though sensors and drives, aimed...
Argentina – Roche
ARGENTINA Stainless steel Dry Coolers and microchannel modular Remote Condenser Stainless steel Dry Coolers and microchannel modular Remote Condenser for Roche company Roche, one of the largest pharmacology company in the world, have just started up its new 6000 m2 depot at Tortuguitas, Buenos Aires State, República Argentina. Need The stored products must be kept at a controlled temperature between 15°C-25°C and with a set point temperature of 24° C in summer and 21° C in winter....
Poland – Chemical industry
POLAND 2 stainless steel Power-J Dry Coolers 2 stainless steel Power-J Dry Coolers for the process cooling in chemical industry in Poland Need Glycol cooling from 43° C to 38° C with adiabatic system operating from 23,6° C to 30° C. Solutions 2 Power-J Dry Coolers model, JGH2390CDQRAF(AFS) S equipped with: • AISI 316L stainless steel tubes and headers; • Hydrophobic blue fins; • Painted RAL 7035 FeZn casing, internal coil with AISI 316L stainless steel side metal sheet; •...
Mróz – Poland
MROZ, POLAND 23 unit coolers 4 Microchannel V-Type remote condensers Food refrigeration Refrigeration for MRÓZ at Borek Wielkopolski (Poland) Need • Meat Meal freezing and storing • 31 cold rooms with total surface 3500 m2 • Total cooling capacity of the chiller c.a. 910 kW cooling solution necessary for whole meat production process Solutions 23 unit coolers: • Cubic, commercial and double flow Unit Coolers for the freezing area (8 units for 170 kW) • Double Flow and Cubic...
Klagenfurt – Austria
KLAGENFURT, AUSTRIA 6 Super Power J Dry Coolers with Wet Fin System (WFS) e AxiTop Drycooler air conditioning ThermoKey for the Klagenfurt University clinic Need • Cooling capacity of 6000 kW • Dimensional restrictions for the installation of the units on the clinic's roof • Low-noise plant Solutions • 6 Super Power J Dry Coolers with Wet Fin System (WFS) and AxiTop • Total capacity: 1,419,000 m3/h • Cooling capacity: 6000 kW
Fruit and vegetable market – Spain
FRUIT AND VEGETABLE MARKET - SPAIN 3 Dual Flow unit coolers model DFX5636008S0134(D) ThermoKey for the fruit and vegetable market Dual flow unit coolers for the industrial refrigeration in Spain. Need • To cool down daily about 100,000 Kilos of fresh fruit and vegetables (artichokes, broccoli, melons) • Initial product temperature: 30° C • Final product temperature: 2° C • Cooling cycle : 8 hours • Required cooling capacity : 390 kW Solutions • 3 Dual Flow unit coolers...
Wind farm – North of Europe
WIND FARM, NORTH OF EUROPE 19 Turbo line condensers model KH1150 completely in stainless steel Wind farm An offshore wind farm (awind power project) in the north of Europe. Need The wind farm and substation include 78 wind turbines with a total capacity of 312 MW. They will be producing green electricity for around 320,000 households every year. Solution ThermoKey has supplied 19 Turbo line condensers model KH1150, which are completely (fins,tubes, casing etc.) in stainless steel 316L...
Greenhouse of orchids – Bleiswijk – Holland
Greenhouse of orchids installation in Bleiswijk, Holland. Need Controlling precisely the temperature in a greenhouse with a total surface of 23,500 m2 for the growth of 2 million orchid plants. Solution 21 Brine Unit Coolers model BHT250.310P6AS equipped with Ec fans.
Poland – Vegetables storage
8 microchannel condensers model MKH1480.BDH, 40 Unit Coolers model IMT450.76DA Vegetables storage The company is one of the biggest Polish producers of broccoli, cauliflower, onion, root vegetables and cruciferous vegetables. Storage capacity includes cooling chambers allowing storage of up to 13 thousand tons of vegetables. Need The Polish company production of root vegetables reaches level 5.600.000 kilos, brassica vegetables at 770.000 kg, onions 3.000.000 kg (data from 2013)....
Houdebine SAS project – France
HOUDEBINE SAS PROJECT, FRANCE Industrial Cubic Unit Coolers, Industrial Dual Flow, Blast Freezers Together with Nestlè-Davigel in the Houdebine SAS project ThermoKey Unit Coolers will ensure the proper temperature to the French company in the various manufacturing and fresh food freezing processes. The Industrial Cubic Unit Coolers will be used in the product preservation cells, the Industrial Dual Flow in the processing areas (where their low-noise level ensures an adequate...
Khoms project – Libya
KHOMS PROJECT, LIBYA V-type Industrial Dry Coolers Industrial Dry Coolers for the Turbogas Power Plant Khoms power plant will be situated in the city of Kohms, 120 kilometres east of Tripoli, in Libya. The project consists in a Turbogas Power Plant, with a 525 Mwe net production capacity, which will supply power to the Libyan Grid. The combined cycle plant will be based on two General Electric gas turbines model 9FA.03, 261 MW each. The main fuel will be Natural Gas and Light...
Agropark
63 Industrial Unit Coolers, 6 Radial Unit Coolers Unit Coolers for food preservation ThermoKey has supplied 63 industrial unit coolers to an important food company. The unit coolers are provided with 5 fans each (630 and 560 mm diameter) for a total capacity of 10.650 kW, serving 45 storage rooms. The units, made for the storage of apples in cold rooms, have been manufactured in accordance with customer's specification: RAL 9010 painted casing, 5/8" copper pipes, aluminium fins and...
Zakład Drobiarski w Stasinie Company, Poland
ZAKLAD DROBIARSKI W STASINIE COMPANY, POLAND TKSmart TKSmart has been chosen by Zaklad Drobiarski w Stasinie company The need is to air-condition the meat processing rooms, each having different volume and needs: Internal distribution: 77 m2 Buffer stock: 27 m2 Packing: 98 m2 + 72 m2 Preparation of raw meet: 30 m2 Handheld storage: 20 m2 Waste warehouse: 119 m2 TKSmart meets all market needs: thanks to the exclusive use of aluminium, it is a light, resistant, reliable and easy...
Engine Deutz TBD – Favignana – Italy
ENGINE DEUTZ TBD - FAVIGNANA - ITALY 1 Dry Cooler with stainless steel 304 casing, 10 fans Cooling down the engine Deutz TBD 620 V16 in the power plant in Favignana island in Sicily The configured system meets the requirements of reliability and resistance to corrosion, characteristics of this type of application for the marine environment. The Dry Cooler will cool down the 2 low and high temperature circuits of a 620 kW CHP co-generation system at the service of the power plant....
Data Centre – Europe
DATA CENTRE 18 Dry Coolers V-Type with adiabatic EC fans The Data Centre challenge The solution we have come up with? 18 V-Type Dry Coolers with electronic fans, adiabatic and self-cleaning system. The Dry Coolers have been specifically designed to provide the best and most efficient solution for the needs of the Data Centre: Durability: corrosion protection of the finned pack, casing, electronic fans and electrical parts; Reduced energy consumption for the cooling down system: free...
Natural refrigerants – Bushehr – Iran
BUSHEHR, IRAN 3 Blast Freezer unit coolers for NH3 Fast Freezing systems for fish processing industry in Bushehr, Iran There is a rapidly growing demand for natural refrigerants from processing cold storage or fast cooling plants, where high capacity and high air flow are needed. To meet these specific market demands, Thermokey is able to satisfy any type of performance and material combination, maintaining the highest product quality standards. In Bushehr,...
The Cumming engine in Al Jubail – Saudi Arabia
AL JUBAIL, SAUDI ARABIA 2 Dry Coolers with a special casing Al Jubail Desalinization plant, in Saudi Arabia Two ThermoKey Dry Coolers will be installed in Saudi Arabia to cool down a powerful Cummings engine, used in the water desalinization process. These Dry Coolers are equipped with a 120 micron thickness powder-painted casing, specific for particularly aggressive environments, in order to protect the unit and maintain a constant efficiency in time. The fan motors are...
Médipôle de Koutio health center – New Caledonia
MÉDIPÔLE DE KOUTIO HEALTH CENTER - DUMBÉA - NEW CALEDONIA 12 Dry Coolers with specific characteristics ThermoKey has been chosen for an important air-conditioning system in New Caledonia Médipôle de Koutio is a health center in the town of Dumbéa, in New Caledonia, which holds the assets of four sites in a single area of 90.000 square meters. Thermokey has taken part to the creation process of the air conditioning system of the complex Médipôle de Koutio , started in 2015,...
Fornovo gas in Opic Estate of Agbara – Nigeria
OPIC ESTATE, AGBARA, NIGERIA Dry Cooler V-shape with 6 explosion-proof fans Opic Estate of Agbara In the Opic Estate of the Agbara desert area, Nigeria, Fornovo Gas, an important customer of ours, has commissioned to us the cooling of a gas compression station consisting of a G3408-LE-SITA 54 (264kW) caterpillar engine and a 3DA300 compressor (225kW). ThermoKey has developed a compact, optimized solution for the cooling of the compressor, aftercooler and jacket circuits in a single...
ORC plants in the geothermic area of Umurlu – Turkey
UMURLU, TURKEY 2 Dry Coolers, model GL2490CNYVQZS Dry Coolers combined with Orc Systems Thermokey confirms its presence in the power generation plant market, where alternative, renewable energy is employed. Indeed, two Dry Coolers (model GL2490CNYVQZS) will be used in the geothermic area of Umurlu, South-West Turkey, to cool down the turbines of two ORC plants, for an overall 24 MW. The dry coolers are equipped with special fans, 180 micron powder coated casing and stainless steel...
Mechel – Chelyabinsk plant – Russia
MECHEL, CHELYABINKS, RUSSIA 6 Dry Coolers Table Shape The Danieli Group at "Mechel" OAO metallurgical plant, Chelyabinsk plant, Russia The Danieli Group has supplied an iron rolling mill to Chelyabinsk Metallurgical Plant (14,5 mW). ThermoKey has provided a platform of 6 Table Shape Dry Coolers (fan diameter 1250 mm) for cooling down auxiliary circuits.
Rijnmond – Rotterdam – The Netherlands
INTER GEN, RIJNMOND, THE NETHERLANDS 16 Dry Coolers V-Shape Project SPX Rijnmond, the Netherlands Rijnmond II is a new 428 MW natural gas-fired power plant in Rotterdam (NL). Plant owner: Inter Gen Main contractor: Siemens Subcontractor: SPX ThermoKey has provided SPX with 16 V-Shape Dry Coolers to cool down auxiliary circuits.
Fortum Tartu – Tartu – Estonia
FORTUM TARTU - TARTU - ESTONIA 10 Dry Coolers Table Shape District Heating and Power Generation AS Fortum Tartu is a holding which owns the Tartu district heating and power generation enterprises, Tartu (EE) Plant owner: Fortum Tartu Contractor: Hiieko Subcontractor: Hiieko ThermoKey has provided Hiijeko with 10 Table Shape Dry Coolers to cool down auxiliary circuits.
Severn Power – Uskmouth – Wales
SEVERN POWER, USKMOUTH, WALES Application: Cooling device for cooling of the turbine bearings and other peripherals of power plants Model: Super Power J Dry Cooler 40 pcs WJGL1690BY Power Line Dry Cooler - 6 pcs WH1380BYV Total power: 32 MW Gas-fired generation station Severn Power is a new 824 MW gas-fired generation station at Uskmouth, near Newport South Wales. Plant owner: Dong Energy Contractor: Siemens Subcontractor: SPX ThermoKey has provided SPX with 40 V-Shape Dry...
Steel-works – Middle-East
STEEL-WORKS, MIDDLE-EAST Super Power-J Dry Cooler, model SJGH2910CDQF(INK)S Steel-works in the Middle East Steelworks planned to produce 1.500.000 t/y of billets and placed in a desert area. Need to cool down the fume treatment plants. Water consumption: 150 m3/h (500 m3/h in normal plants). Capacity required total 103,710 kW. Used 30 pcs Super Power-J Dry cooler model SJGH2910CDQF(INK)S with self empty drenable configuration, CE electrical panel and flanges.
Microchannel: 55% more convenient than traditional solutions
Due to F-Gas regulation, HFC refrigerants are increasing their cost and are becoming - day by day - more difficult to find on the market. For example, in the last 7 months we have seen a 225% price increase for R404a (now around 58 Euro / Kg). The market expects the same level of price increase for all the refrigerants in phase-out like R507, R410A, R407F Phase Out HFC refrigerants 2020: operational limitation of stationary refrigeration equipment (see F-GAS regulation). 2022:...
Data-centre Coolers
As computer chips get smaller and faster, they’re getting hotter and hotter. Typically, almost 40% of a data centres’ electricity bills comes from its cooling equipment. To help reach the exaflop barrier and beyond, some data centres are investing in better cooling systems than current standard technologies. The sole purpose of data centre cooling technology is to maintain environmental conditions suitable for information technology equipment (ITE) operation. Achieving this goal requires...