Air conditioning

ThermoKey DryCoolers and Remote Condensers offer a high thermic comfort for hotels, banks, universities, hospitals, shopping centres, theatres etc.

ThermoKey meets the challenges of our time: Dry Coolers are an efficient solution to cool servers and big data centres, as well as cooling production processes where the free cooling system leads to energy savings and water waste reduction.

ThermoKey offers a wide product range, thus guaranteeing the best trade-off between the plant’s purchase and operating costs.
The great offer and the ability to come up with customized solutions, guarantee the best outcome based on the plant’s location, the sound level requested, the space available and the aggressiveness of the work environment.

For the past 25 years ThermoKey has offered to its clients, heat dissipation systems which have proven reliable and performing through time.

Modular Dry Cooler

Micro Modular Dry Cooler with microchannel technology and EC fan motors. Single module with two fans & four vertical coils for very high efficiency. Each module provides 200 kW capacity with footprint of 1.1 m by 2.2 m, and weights 455 kg. Above unit provides nominal 1000 kW, with a footprint of 6.0 m x 2.2 m. Variable speed fans adjust RPM depending on heat load and ambient. Reduced in/out connections for limited in site installation. Individual isolation valves per module, allow...

Super Power-J Dry Coolers

Super Power-J Dry Coolers Super Power- Dry Coolers Performance range: Capacity from 290 to 2219 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: Maximum performance, minimum footprint High efficiency geometry Modular design, 8-20 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories AFS (Air Fresh System)...

Power-J (V-Tower) Dry Cooler

The Power-J (V-Tower) is a series of drycoolers that can be equipped with the EPS adiabatic system. The EPS (Evaporative Panel System) is an adiabatic system with evaporative panels to reach higher specific capacity compared to a traditional Dry Cooler. The adiabatic system can operate in two ways: Water Saving: increased specific capacity when using H2O – (H2O when engine at maximum). Energy Saving: energy saving to help the fan (H20 immediately). The Power-J (V-Tower)satisfies the VDI...

TKMicro V-Type Modular Remote Condensers

Performance range: capacity for each module: TKMicro 25: 148 kW TKMicro 32: 160 kW Fans diameter Ø 800 mm, AC or EC motor Modules from 1 to n

TKSmart (Light Remote Condensers)

Performance range: capacity from 13 kW to 98 kW(*) 1-4 Fans: diameter Ø 400, 500, 630 mm, AC or EC fans (*) Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C

V-Type Remote Condensers

Performance range: capacity from 90 kW to 870 kW (*) Fans: diameter Ø 800, 900 mm, AC or EC motor Units can be customized with a wide range of accessories (*) Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C

Table-type microchannel remote condenser

Performance range: Capacity from 10 kW to 480 kW(*) +30% capacity vs traditional condensers with the same footprint Modular design, 1-8 fans Reduced dimensions and weight Fans: diameter Ø 300, 400, 450, 500, 630, 800, 900 mm, AC or EC motor Units can be customized with a wide range of accessories (*)Standard conditions - R404A, condensing temp: 40°C, subcooling: 3°K, desuperheat: 25°K, air temp: 25°C

Turbo-J Condensers

Area of use: Gas condensation Performance range: Capacity from 100 to 1915 kW (R404A, Tc= 40 °C, T1= 25 °C) Fans: Diameter Ø 900 mm, AC or EC motor Benefits: Maximum performance, minimum footprint High efficiency geometry, Modular design, 2-16 fans Piping in copper or stainless steel AISI 304 Finned pack available in a wide range of materials Complete range of accessories, 8 sound levels AFS (Air Fresh System), WFS (Wet Fin System) and EPS (Evaporative Panel System) available...

Turbo-Line Condensers

Area of use: Gas condensation Performance range: Capacity from 10 to 1200 kW (R404A, Tc= 40 °C, T1= 25 °C) Fans: Diameter Ø 500, 630, 800 mm, AC or EC motor Benefits: High efficiency geometry Modular design, 1-16 fans Piping in copper or stainless steel AISI 304 Finned pack available in a wide range of materials Complete range of accessories, 8 sound levels Premium series available for fans Ø 500 and 630 mm Casing in galvanized steel, powder painted

TKMicro H2O Modular Liquid Coolers

Performance range: capacity for each module up to 120 kW** Fans: Diamter Ø 800 AC and EC motor Modules: from 1 to n (**) Standard conditions - ΔT = 15k ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C

Super Power-J Dry Coolers

Performance range: Capacity from 290 to 2219 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: Maximum performance, minimum footprint High efficiency geometry Modular design, 8-20 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories AFS (Air Fresh System) o WFS (Wet Fin System), available upon request

Power-J Dry Coolers

POWER-J DRY COOLERS (1 FAN ROW) Performance range: Capacity from 70 to 961 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 800, 900, 1000 mm, AC or EC motor Benefits: High efficiency geometry Modular design, 2-7 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories AFS (Air Fresh System) o WFS (Wet Fin System), available upon request POWER-J DRY...

Power-Line Dry Coolers

POWER-LINE DRY COOLERS Performance range: Capacity from 8 to 890 kW (ethylene glycol 35%, Tw1=40°C, Tw2=35°C, T1=25°C) Fans: Diameter Ø 500, 630, 800, 900, 1000 mm, AC or EC motor Benefits: High efficiency geometry Modular design, 1-10 fans 8 sound levels Piping in copper or stainless steel AISI 304 or AISI 316L Finned pack available in a wide range of materials Complete range of accessories Casing in galvanized steel, powder painted POWER-LINE DRY COOLERS (2 FAN...